UTAH SKI GEAR

This Side Edge File Guide is great for on the go tuning or on-mountain touch ups! 

• Ergonomically shaped device for side edge sharpening.
• Side angles: 90, 89, 88, 87 Degrees
• Includes a metal file

Directions: Place side with selected degree number on the ski, orient guide so that the selected degree is right side up and then slide the file/guide in the direction of the arrow on your side edge. 

 

About Utah Ski Gear:

Utah Ski Gear was established in 2011 and we believe that skiing is for everyone. Helping our customers find the right equipment to get them and their family skiing is our passion. We understand price can be the biggest deterrent and because of this we offer new and used skis on a budget. For the more experienced skier looking for advanced gear we offer hard to find accessories like specialized tuning equipment and high performance skis. Customers preferring maximum comfort while skiing can find electric boot heaters, such as Hotronic FootWarmers.

Listing Notes:

Photos are stock photos and are not property of Utah Ski Gear. This product was listed by Oscar at Utah Ski Gear.

The Ski Man World Cup 400 grit medium diamond file is a must have ski sharpening tool at a great value. Ski Man is internationally know for their high tech and high quality ski and snowboard tuning supplies. 

• 400 grit diamond file
• medium
• high quality
• Compatible with all sharpening tools
• Hand grip on the back side
• Clean after use

Part Number: 57-401-202

This handy ski base planer without the true bar and steel blade is made by FK SKS and is great for base work.

• Universal holder
• Works for 3300/4004/4006 tools by SKS
• STEEL BLADE PICTURED BELOW NOT INCLUDED
• HOLDER ONLY

Part number: 300 H

Need a replacement file for your ski file holder? This 1.4 inch file fits with most. Specifically made for Swix file holders like the TA3001 edge tool, this file is durable and built to last. Always make sure you replace your files in a timely manner, as dull files have the tendency to increase the base bevel.

• Replacement file for TA3001, 3002 and 3005
• Fits most file holders
• 40 mm x 22 mm x 3.3 mm
• For beginning ski tuners

Part Number: T0206XS

About Utah Ski Gear:
Utah Ski Gear was established in 2011 and we believe that skiing is for everyone. Helping our customers find the right equipment to get them and their family skiing is our passion. We understand price can be the biggest deterrent and because of this we offer new and used skis on a budget. For the more experienced skier looking for advanced gear we offer hard to find accessories like specialized tuning equipment and high performance skis. Customers preferring maximum comfort while skiing can find electric boot heaters, such as Hotronic FootWarmers.

Listing Notes:
All our photos for this product are professionally taken in house and are of the actual product you will receive. This file was photographed and listed by Austin at Utah Ski Gear.

BEAST's proven stainless steel and polycarbonate design is tremendously successful with ski tuning techs around the world. This uniquely designed ski base edger features angled side arms, a "tongue" file grip, and ergonomic finger rests, allowing for efficient cutting and an easy, comfortable grip. The stainless steel floating elevation bar tilts the file or stone at a precise angle for easy set-up and base edge bevel maintenance.

The polycarbonate used in the Base BEAST frame is one of the toughest and most stable materials available. It is used in many high tech applications, including eyeglass lenses, Blu-ray discs, and bulletproof shields.

The Base BEAST's accuracy is assured by a patented design, which maintains the base angle with a precise stainless steel elevation bar set at the optimum distance from the ski edge. This durability of material combined with an accurate, easy to use design makes Base BEAST the #1 selling base edge beveler in the world!

Choose From:

• .5° Orange
• .75° Green
• 1° Red
• 1.5° Blue
• 2° Black

 

Skiing is dangerous. Ski at your own risk.

 

About Utah Ski Gear:

Utah Ski Gear was established in 2011 and we believe that skiing is for everyone. Helping our customers find the right equipment to get them and their family skiing is our passion. We understand price can be the biggest deterrent and because of this we offer new and used skis on a budget. For the more experienced skier looking for advanced gear we offer hard to find accessories like specialized tuning equipment and high performance skis. Customers preferring maximum comfort while skiing can find electric boot heaters, such as Hotronic FootWarmers.

 

Listing Notes:

All our photos for this product are stock and not the property of Utah Ski Gear. This ski was listed by Oscar at Utah Ski Gear.

The Swix Spare File to TA3009N and TA3010N also works as a spare part for TA3007 and TA3008. The spare file is 80 mm.

• Swix spare file
• 80 mm

Part Number: TA3010SF

The Swix spare blade square works with the Swix Sidewall cutter racing (TA103), the Swix Sidewall Cutter Economy (TA101N) and the Swix World Cup Sidewall Cutter (TA104).

• spare blade
• square

Product Number: TA100SB

`

The compact edger by Swix is essential for any hand tuner. It is ergonomic, easy to work with and will have allow for flawless edges on you skis.

• Side-edge 87 and 88 degrees
• Compact and easy to work with
• 80 mm file

Product Number: TA3009N

The Swix Four Degree Edger gives you plenty of options when it comes to edge angles. This pocket sized edger has file side edges 87, 88, 89 and 90. Keep your skis tuned and ready to go with this must have edging tool.

• ergonomic and pocket sized
• made in Italy

Part Number: TA4002

The Compact Edger Kit by Swix has everything you need to easily tune on the go. The ergonomic file holder has a 80 mm file and diamond stone for polishing as well as abrasive stone for deburring the edge.

• Ergonomic file holder with 80 mm file
• Diamond stone
• Abrasive stone
• Ski brake retainer included

Part Number: TA3010N

The Pocket Edger by Swix is a must have for tuning on the go. Side-edge 87 and 88 degrees.

• pocket sized
• includes 44 mm file
• Easy to work with

Part Number: TA3001NO-N

The Pocket Edger Kit by Swix is a convenient file holder with a 44 mm file, diamond stone for polishing and abrasive stone for deburring the edge. The ski brake retainer is also included.

• pocket sized
• includes 44 mm file, diamond stone, abrasive stone and ski brake retainer

Part Number: TA3005N

Trust Swix to make a quality tool to make cleaning files easy. This is one of the nicest file cleaning brushes we have used, a simple but essential tool.

• Use on your dirty file when sharpening edges.
• Improves cutting efficiency
• Fine brass bristles removes filings and other buildup from file teeth for longer life
• Bristle patch measures 2 inch x .77 inch with half inch long brass bristles
• Swix logo on the wood handle, approximately 6 inches

Part Number: T0177B

The Base File Radial 300 mm by Toko is great for working on ski and snowboard bases. This product works wonders for material removal.

• Extra long length for more leverage and power
• Remove material with ease

Part #: 5546797

UPC: 08050006797

The Base File Radial 100 mm by Toko is great for working on ski and snowboard bases. This product works wonders for material removal.

• This product is suitable for the Scraper Sharpener World Cup by Toko.
• Remove material with ease

Part #: 5560019

UPC: 7613186170059

The Toko Ergo Race File is the original spare part file for the Ergo race part #5549834. File supports side edge preparation as well as base edge preparation. 

• Replacement file only
• For use in Ergo race device
• Easy to use in Ergo race
• Extend the life of your tuning supplies
  
  Part Number: 5549864
  UPC: 4250423601971

File your ski edges like a pro when you use the Swix Base File Guide. This aluminum file guide is light weight and strong. Set up the base edge angles on skis and snowboards just the way you want them. This file lets you adjust the edge angle from 0.5° to 2°, perfect for most skiers and riders out there. Proper edge angles can really make or break your experience, make sure you get it right. This file guide can help you get exactly the angle you need, every time.

• Aluminum file guide for setting base edges on skis and snowboards
• Adjusts from 0.5° to 2°
• These boxes were damaged in shipment, but there is no damage to the item itself

Part Number: TA0520 EAN: 7045951821642

The DMT Extra Coarse Diamond Stone hones your ski edges quickly and easily. This mini 70mm diamond file for skis features the famous DMT polka-dot pattern and is built to last you for years and years. The Extra-Extra Coarse stone (Silver) from DMT will get those edges sharpened in a flash. For a professional edge finish, make sure you use a fine polishing and gummi stone after the initial edge honing has been completed.

• Extra-Extra coarse file for ski edges
• Brings dull ski edges back to life quickly and easily
• Extra-Extra Coarse 120 grit mesh / 120 micron
• 70mm long (2.7 x 15 x 16 x 0.2 inches)
• Silver

Part Number: 703Silver  

This Swix World Cup Pro Stainless Steel file is a top of the line file and is preferred by most professional ski tuning techs. This new generation of files produced by Swix reduces the need for a second use of files for finishing. While this file might seem to be more expensive than others, it is because it is built to last 10 times as long as regular files which ends up saving loads of money in the long run. This particular file is 4" long (100MM) and the grit is fine (17 TPI)

• • Stainless Steel
  • Fine
  • 17 TPI
  • Lasts 10 times as long as regular files
  • 4"(100MM)

*TPI: Teeth Per Inch

The 8 inch Bastard First Cut 13tpcm file from Swix is a great file to add to your quiver. This is the best file for initial side bevel and setting the side angle. It is chromed and built to be extremely durable.

• First Cut file for ski tuning
• 8 inches (20cm)
• 13 tpcm
• Chrome

Part Number: T107X Order to Use Files: Start with Swix File T107X Bastard First Cut 8"/20cm 13tpcm. Use this file for initial side bevel and setting side angle. Secondly, use Swix File T106X 8 inch Second Cut 8"/20cm 16tpcm. Use this file for side beveling as well as base beveling set up before diamond work. Third use Swix File T104X 6 inch Smooth Cut 6"/15cm 20tpcm. This chrome finishing file is shorter with increased tpcm to smooth out striations left by second cut file. *TPCM: Teeth Per Centimeter

This convenient brass file brush is a great tool for cleaning your ski files. Keeping your files free of debris will ensure that your file is performing at its best. Simply brush parallel to the teeth of your file to remove the debris.

• 5 3/4" Long
• Brass Bristles

Part Number: 55-500-035

Is the file in your Wintersteiger Pro Sharp or Racing Sharp edge tools getting dull? Rather than buying a whole new tool you can just purchase a replacement file. This 80 mm file is compatible with the Wintersteiger Pro Sharp as well as the Wintersteiger Racing Sharp File Guide.

• Replacement File
• Length: 80 mm
• Width: 25 mm
• Works with Wintersteiger Pro Sharp 57-401-030 and Wintersteiger Racing Sharp File Guide 57-401-145

Part Number: 57-401-174 EAN: 9120028580719

This ICECUT Bastard File made by Wintersteiger is a convenient tool used to sharpen your ski edges. It is a flash-chrome file that ensures accurate beveling with a comfortable and tangless design. Because of this, the file is used by World Cup technicians as well as for its precision cut teeth. This file offers superior ski edge tuning. ICECUT files are the straightest file available for accurate beveling. In addition they have one of the highest Rockwell hardness so you can be certain that the file will last. This file can be used with a file guide to put a custom edge angle on your skis

• Length: 120 mm
• Width: 22mm
• Bastard Cut
• 4 3/4" long in total

Part number: WS-55-500-037

This file card brush made by Wintersteiger is the perfect tool for cleaning debris from the teeth of your ski files. Properly cleaning will help to prolong the life of your file and also ensures that you are getting an A quality edge tune every time. The brush is double sided with longer coarse bristles on one side and then shorter metal bristles on the back side.

• Ski File Brush
• Length: 220 mm
• Width: 50 mm
• Double sided

Part Number: 57-200-050

The ICECUT Professional File is a super chromed file for accurate beveling with a comfortable and tangless design. Because of this, the file is used by World Cup technicians as well as for its precision cut teeth. This file offers superior ski edge tuning. ICECUT files are the straightest file available for accurate beveling. In addition they have one of the highest Rockwell hardness so you can be certain that the file will last. This file can be used with a file guide to put a custom edge angle on your skis

• Length: 150 mm
• Width: 17mm
• Smooth Chrome
• 7" long in total

Part number: WS-55-500-038

To finish an edge tune on your skis, make sure you use the Swix Diamond Stone Fine File. This 600 grit file is ideal for fine polishing, or removing tiny burrs from the edges of your skis. To optimize the performance of this fine diamond file, use it after diamond stones with coarser grits. The grit on the Swix Diamond Stone Fine File is perfect for finishing the edges on technical skis. This product is best used with water. When you want a professional finish on your ski edges, but don't want to pay an arm and a leg, use this economy option from Swix.

• Diamond stone file for skis
• Hones and polishes edges
• Fine grit 600
• 70mm (2.76 in)
• For optimal results, use after coarser grit files

Part Number: TAA600S EAN: 7045950831574

This professional grade, non-chromed file offers a superior cut when it comes to filing ski edges. With the Swix Racing Pro File Fine you can improve your skis glide, speed, carving ability, and overall performance.

• Coarse
• Durable file for ski edges
• Professional grade tool
• 4 inches long (100mm)
• 4”/100mm. 10 TPCm
• Non-Chromed

Part Number: T107RS

This professional grade, non-chromed file offers a superior cut when it comes to filing ski edges. With the Swix Racing Pro File Fine you can improve your skis glide, speed, carving ability, and overall performance.

• Fine
• Durable file for ski edges
• Professional grade tool
• 4 inches long (100mm)
• 4”/100mm. 16 TPCm
• Non-Chromed

Part Number: T104RS EAN: 7045951669725

This hard aluminum file guide from Swix provides an accurate 5 degree angle to your ski's side edges. This angle is perfect for recreational riders who like to keep their edge in sharp, working order. Compatible with your favorite tuning files, this sturdy aluminum tool is a necessity for any home ski tuner. This angle is great for both slalom and giant slalom events.

• Side edge file guide for skis
• 5 degree bevel
• Hard aluminum construction
• Compatible with most files

Part Number: TA485

File your ski edges like a pro with this Swix Base Edge File Holder. Getting the proper edge angle on a ski can dramatically change your skiing experience. This tool will help you put a 1.5 degree base edge angle on your skis. You will use this tool to put a base edge angle before setting up your side edge angle

• 1.5 degree base edge angle
• File not included

Part Number: TA015

File your ski edges like a pro with this Swix Base Edge File Holder. Getting the proper edge angle on a ski can dramatically change your skiing experience. This tool will help you put a 0.5 degree base edge angle on your skis. You will use this tool to put a base edge angle before setting up your side edge angle

• 0.5 degree base edge angle
• File not included

Part Number: TA005

This sturdy Inox Steel Ski Man Side Edge File Guide from Wintersteiger allows you to apply a precise 89 degree side edge angle on your skis or snowboard. This reliable tool can be used with most files and diamond stones. The innovative milled corner channel allows filings and shavings to fall away from the base, leaving you with a pristine work area. If you're planning on tuning your skis at home, make sure you have one of these file guides handy.

• Side edge file guide for skis and snowboards
• Tunes edges to 89º
• Inox Steel
• Milled corner channel keeps edges free from debris

Part Number: WS-57-401-306