UTAH SKI GEAR

This single ThermicSole TrimFit insole works with all Therm-ic battery packs, and delivers heat to your cold feet while you ski. The TrimFit heated insole is a self-adhesive cambrelle cover, and heating element designed to be used with a custom or aftermarket footbed. Keep this replacement insole handy, because there's little that's worse than having one numb foot, while the other is still warm. The single TrimFit Sole is for the left foot. 

• Single ThermicSole TrimFit (Cambrelle cover with Heating Element) for Left foot
  
• Compatible with Therm-ic Max or SmartPack battery packs
• Easy to install with any insoles
• Open Box Return
• The blue strip pictured has been replaced with an equivalent, red strip from Hotronic.

Part Number: 01-0400-062-B

The Hotronic Battery Pack Wire Clip Kit is replacement part for when you need to upgrade the wire clip system on your ski boot heaters. If a wire clip goes missing, gets bent or broke, you can easily replace it with a clip from this kit. Use these clips on any Hotronic battery pack to secure it to your power strap.

• Replacement wire clips
• 1 pair
• Open Box Return

Part Number: 01-0100-1590

These heated insoles from Hotronic are anatomically shaped to support the arch of the foot, so you can enjoy the ultimate comfort when warming your feet with these battery powered ski boot heaters. These Semi Custom Heat Ready Insoles can fit US women's shoe sizes 6 to 7.5. Just trim the insoles down to fit the smaller size, attach the heating elements and battery packs and off you go on a long adventure in the coldest weather with comfy feet all day long. These custom boot heater insoles are compatible with all Hotronic battery packs and heating elements. To install, first make sure the heating element is situated directly under the ball of your foot. Then cut a narrow slit for the heating element cord to run through and stick the heating element on the bottom of the custom insole. Attach the heating element to the battery pack and you're all set. For detailed instructions on how to set up your Hotronics, check out our guide.

• Heated insoles fit in any shoe
• Size Small: 23.0-24.5 (US Women's 6-7.5, Men's 5-6.5)
• Trim to a custom fit
• Compatible with Hotronic battery packs and heat elements
• Open Box Return!

Part Number: 01-0100-1324

The slide strap brackets replace the wire clip system, allowing you to mount on the side of the ski boot. This keeps powerpacks out of the way of top buckles for convenient placement. If you had problems bumping your powerpacks on the chairlift or the curb, these are the solution.

• Comes as a pair
• Packaging includes installation instructions
  

Part Number: 01-0100-1505

Secure your Hotronic battery packs to your ski boots quickly and easily with the Hotronic Mounting Brackets. Just drill a single hole into your boot's shell and screw in the brackets.

Part Number: 01-0100-1500

The Hotronic Power Plus S4+ Battery Pack is stronger than ever before. The switch is redesigned to prevent unintended switching. This battery is for use with ski boot heaters from Hotronic. This super powerful battery contains 4 NiMH cells that work even in the coldest weather. Fully rechargeable, the S4+ battery has 4 temperatures settings ranging between 84 and 173 degrees Fahrenheit. At its most efficient, the S4+ lasts up to 21 hours. Use the first 3 temperatures settings for keeping feet warm, and reserve the fourth heat blast setting for when your cold toes need an extra surge of warmth. Upgrade your current Hotronic battery to the S4+ for longer lasting, more intense foot warming capabilities. This battery pack is compatible with the 'White Plug Charger'.

• One Battery pack for Hotronic Ski Boot Warmers manufactured in 2020
• Fully rechargeable
• 4 NiMH battery cells
• 4 temperature setting from 84-173F (29-78C)
• Lasts up to 21 hours

Part Number: 01-0100-1143

Looking for battery replacements for your ? Rather than buying an entirely new XLP One Heat Socks Set, cold-footed winter sports enthusiasts can now order just the spare batteries and charger, so you can keep your feet warm while saving money.

Each battery lasts up to 13.5 hours, depending on which temperature setting you choose. 4 temperature settings let you customize your foot warming experience so you can enjoy more time outdoors, or just keep cozy at home.

• Includes 2 XLP One lithium-ion batteries + wall charger
• North American & European plug adapters, 100V to 240V
• 3 constant heat settings PLUS 1 heat boost setting
• 2 year warranty
• ONLY FOR USE WITH HOTRONIC XLP ONE HEAT SOCKS

Part Number: 01-0100-3186

The Hotronic Tech Dry Boot, Glove, and Helmet Dryer is a great way to keep all of your gear warm and dry.

From hiking boots to ski helmets, the Hotronic Tech Dry is a quick and convenient way to keep all of your gear dry and ready to go. Tech Dry has a convenient, lightweight design and a digital display variable easy settings that let you see the temperature and time to dry. The Tech Dry also has an automatic start and stop, quiet operation, and is great for removing odors. For use with biking, climbing, trekking, snowboarding, ski touring, downhill skiing, skating, hunting, and fishing gear.

110V

Art. No. 01-0100-5206

About Utah Ski Gear:
Utah Ski Gear was established in 2011 and we believe that skiing is for everyone. Helping our customers find the right equipment to get them and their family skiing is our passion. We understand price can be the biggest deterrent and because of this we offer new and used skis on a budget. For the more experienced skier looking for advanced gear we offer hard to find accessories like specialized tuning equipment and high performance skis. Customers preferring maximum comfort while skiing can find electric boot heaters, such as Hotronic FootWarmers.

Listing Notes:
Photos are stock photos and are not property of Utah Ski Gear. This product was listed by Austin at Utah Ski Gear.

The Hotronic Heating System Micro Dry Boot Dryer is the perfect portable tool for keeping your boots dry at home or on ski trips.

The Hotronic Micro Dry Boot Dryer is easy to bring with you anywhere you go skiing thanks to it's car power adapter, worldwide power supply plugs, and convenient travel and storage bag. The Micro Dry Boot Dryer is quiet, convenient, and lightweight. It is the perfect tool for drying and pre-warming your ski boots!

12V / 110-220V

Art. No. 01-0100-5205

About Utah Ski Gear:
Utah Ski Gear was established in 2011 and we believe that skiing is for everyone. Helping our customers find the right equipment to get them and their family skiing is our passion. We understand price can be the biggest deterrent and because of this we offer new and used skis on a budget. For the more experienced skier looking for advanced gear we offer hard to find accessories like specialized tuning equipment and high performance skis. Customers preferring maximum comfort while skiing can find electric boot heaters, such as Hotronic FootWarmers.

Listing Notes:
Photos are stock photos and are not property of Utah Ski Gear. This product was listed by Austin at Utah Ski Gear.

Therm-ic Cambrelle Covers can be used with any insoles. Protect your feet from a heating element with this high quality Cambrelle fabric that is self-adhesive. Use them to mount the heating element to the top of your insoles or with any other orthotics.

• 1 pair Cambrelle covers, self-adhesive foot-bed covers
• Wicking and shock resistant
• For use with any insoles

Part Number: TC-44-0900-002

Having trouble finding your charging cable for your boot heaters? With this replacement USB Charging Cable you will be back up on the slopes with warm feet in no time. This particular cord will fit all adapters with USB ports. It is compatible only with Therm-ic's C-Pack battery line. It features a splitter so that you can charge both of your batteries at once.

• USB Charging Cable for C-Pack Batteries
• Can charge 2 batteries at once
• Cord Only, Does not include wall outlet
• Fits all USB adapters with USB ports

Part Number: Tc-T41-0501-001

The Therm-ic C-Pack 1300 batteries are the most affordable batteries in the C-Pack family. This battery is used in conjunction with Therm-ic's C-Pack heating elements to give you toasty warm feet while up skiing, snowboarding, or other outdoor winter activities. The C-Pack 1300 batteries offer warmth for up to 13 hours. They feature a single control button which allows you to toggle the heat intensity at the push of a button. This particular battery is suitable for use with Therm-ic Insoles Heat Flat, Heat 3D and C-Pack Heat Kit Range only.

• 1- Single C-Pack 1300 Battery
• Charger not included
• Up to 13 hours of heat

Part Number: T41-0901-001

The C-Pack 1300 Bluetooth battery is used in conjunction with Therm-ic's C-Pack heating elements to give you toasty warm feet while up skiing, snowboarding, or other outdoor winter activities. The C-Pack 1300 batteries offer warmth for up to 13 hours. They feature a single control button which allows you to toggle the heat intensity at the push of a button. This particular battery is suitable for use with Therm-ic Insoles Heat Flat, Heat 3D and C-Pack Heat Kit Range only.

• 1- Single C-Pack 1300 Bluetooth Battery
• Charger not included
• Up to 13 hours of heat

Part Number: T41-0901-002

The Therm-ic C-Pack Extension Cords 20cm is the perfect solution for hooking your footwarmers up to taller boots. If the heat element cord isn't making it all the way out to the top of your booth then you can plug these 20cm cords into your heated insoles to add the extra length needed to hook into your battery at the top of your ski boot. Now you can easily adjust your temperature setting for optimal comfort while skiing or snowboarding.

• 2 extension cords for Therm-ic C-Pack batteries
• 20cm (7.8 inches)
• Connect Battery Pack to heating elements
• Great for tall boots
• Compatible with Therm-ic C-Pack Heat Elements and C-Pack Battery

Part Number: Tc-T40-0900-004

For easier access to your ski boot heater settings, try out some Therm-ic C-Pack Extension Cords. These 120cm cords plug into your heated insoles, and can then be fed up under your pant leg to your chest pocket or the top of your bibs where you can keep your battery pack conveniently located. With your heat control so close at hand, you can easily adjust your temperature setting for optimal comfort while skiing or snowboarding.

• 2 extension cords for Therm-ic C-Pack batteries
• 120cm (47.3 inches)
• Allows you to wear your PowerPack above your waist for easy access
• Plugs into Therm-ic ski boot heater elements
• Compatible with Therm-ic C-Pack Heat Elements and C-Pack Battery

Part Number: Tc-T40-0900-005

Did the wire clip on your Therm-ic C-Pack Battery go missing, get bent or break? The Therm-ic C-Pack Replacement Clip is an easy upgrade to your battery for your ski boot heaters. With this clip there is no need to buy a whole new expensive battery. Instead you can easily replace just the clip. Use these clips on your Therm-ic C-Pack Battery pack to secure it to your power strap.

• Replacement wire clip
• 1 clip
• Works with Therm-ic C-Pack Batteries

Part Number: Tc-T41-0901-004

Make sure you're all set for the cold ski season, and have replacement heating elements for your Therm-ic heated insoles. Rather than buying a whole new kit just because you lost or broke a heating elements, you can buy a set of replacement heating elements which will be a lot cheaper. Thermic's ultra-thin heating elements will integrate perfectly into any type of insole. These particular heating elements are compatible only with Therm-ic C-Pack Batteries.

• 2 heating elements
• Compatible with Therm-ic C-Pack Batteries
• Ultra-thin

Part Number: Tc-T44-0900-001

The Therm-ic Heat Kit comes with two self-adhesive Cambrelle Covers as well as two heating elements. You will use this kit to install your heating elements on any insole. After which you will install the self-adhesive cambrelle covers on top of the heating element and insole. These help to protect your feet from the heating element. After sticking to your insole the cambrelle covers can easily be trimmed to size with scissors or a razor blade. The heat elements included with this kit are intended to go with the Therm-ic C-Pack battery range only. Batteries are required for operation, but are not included.

• 1 pair Cambrelle covers, self-adhesive foot-bed covers
• 1 pair of Therm-ic Heat Elements
• Wicking and shock resistant
• For use with any insoles
• Only compatible with Therm-ic C-Pack Batteries

Part Number: T44-0100-002

The Therm-ic Heat Flat insole is a very thin heated insole that comes integrated with the therm-ic heating elements. These footwarmers are one of the best ways to stay warm on those cold days on the slopes. This insole can be trimmed down with scissors so that it fits snuggly into any size ski boot or shoe. When trimming make sure to follow trim lines on the bottom of the insole to avoid cutting though the heat element in the toe area. The heat element contained in this heat flat is compatible only with Therm-ic C-Pack Batteries.

• • Flat insole with integrated heat element
  • Trim to fit
  • Only compatible with Therm-ic C-Pack Batteries
  • Does not include batteries

Part Number TC-T44-0100-001

Keep your feet warm and comfy with these open box return Hotronic Boot Doctor Anatomic Insoles. These semi-custom insoles fit in ski boots or any other shoe, and come equipped with a pre-installed heating element. The supportive EVA foam molds to your foot for long lasting comfort where you need it most. You can trim these insoles for a more customized fit, then quickly install them in your ski boot, hook up your battery pack, and you're all set for hours of warm feet in even the coldest weather.

• EVA foam insoles with pre-installed heating element
• Comfortable and supportive ski boot heaters
• 1 Pair
• X-Large (30.5-30.0) Mens: 10.5-11.5
• This item was previously purchased and returned

Part Number: 01-0100-1347

Are you missing a heating element for your Hotronic? No, worries, Utah Ski Gear sells replacement parts for your favorite boot heaters. No need to buy a whole new heated insole set up. This single heating element includes a Cambrelle cover for the right foot and is compatible for all Hotronic insoles.

• 1 Hotronic heating element
• 1 Cambrelle cover included (right foot)
• For use with any Hotronic insoles or battery packs

Part Number: Single 1220

Therm-ic Sole Perform are the ultimate heated insoles for ski boots. These EVA form insoles will fit in any style boot and come equipped with heating elements. Perform insoles are compatible with any Therm-ic Foot Warmer battery packs. These anatomical insoles fit your feet for a more customized feel, and have an upgraded stabilization line for better distribution of heat.

• 1 pair of EVA form insoles with heat elements
• Size XX-Large (US Men's 13-14, boot size 30-31)
• Customized fit
• Keep your feet warm longer when skiing or snowboarding
• Works with any Therm-ic SmartPack

Part Number: TC-01-0400-060-XXL

If you've busted your Hotronic heating element, or can't seem to find it, just get a replacement from Utah Ski Gear. Instead of spending money on a whole new set of Hotronics, find the replacement parts you need when your gear gets lost or wears out. This Hotronic heating element is compatible with all models of battery packs and foot beds from Hotronic.

• 1 replacement heating element
• For use with Hotronic heated insoles only
• Save money on replacement parts
• For more information on all Hotronic products, including installation, click here

Part Number: Single 1229

Are you missing a heating element for your Hotronic? No, worries, Utah Ski Gear sells replacement parts for your favorite boot heaters. No need to buy a whole new heated insole set up. This single heating element includes a Cambrelle cover for the right foot and is compatible for all Hotronic insoles.

• 1 Hotronic heating element
• 1 Cambrelle cover included (right foot)
• For use with any Hotronic insoles or battery packs

Part Number: Single 1220

Attach some Hotronic heat elements and battery packs to these semi-custom boot warmers and enjoy hours of warm feet when skiing, snowboarding or snowshoeing. These extra large insoles can be trimmed down to fit feet between 10-12.5 (US Men's) and fit into any shoe, not just boots. Made with comfort in mind, these insoles have ample arch support and keep the heat right where you need it the most, under the ball of the foot. These heat ready insoles are intended to be used with Hotronic batteries and heating elements.

• Semi-custom insoles can be trimmed for a perfect fit
• For use with Hotronic heat elements and battery packs
• Size Extra Large: 29-30.5 (US Women's 12 , US Men's 10-12.5)

Part Number: 01-0100-1330

Slip these Large Heat Ready Insoles from Hotronic into your ski boot for a custom heat experience that will keep your feet warm and toasty for hours. When you attach the Hotronic heat elements and battery pack (not included), your feet receive warm electrical currents so you can enjoy your favorite cold weather activities for hours. These semi custom insoles can be trimmed to fit feet between sizes 10 and 11 (Women's) or 9 to 10 (Men's) and slip easily into your ski boots. These heat ready insoles are intended to be used with Hotronic batteries and heating elements.

• Semi custom heat-ready insoles
• For use with Hotronic heat elements and battery packs
• Size Large: 27-28.5 (US Ladies 10-11, Men's 9-10)
• Trim to fit smaller sizes

Part Number: 01-0100-1328

Enjoy warm feet all day long with these semi-custom heated insoles from Hotronic. Fitted for US shoe sizes 8 to 9.5, these supportive Heat Ready insoles can be trimmed down to fit the smaller size. Attach your Hotronic heat elements and battery pack and then insert these boot heaters into any shoe. Skiers love having warm toes all day long when they use these heated insoles. No matter how cold the temperature, or how deeply you feet sink into the snow, you can enjoy comfort on the slopes for hours. These heat ready insoles are intended to be used with Hotronic batteries and heating elements.

• Semi-custom heated insoles
• For use with Hotronic heat elements and battery packs
• Size Medium: 25 - 26.5 (US Women's 8-9.5, Men's 7-8.5)
• Trim to fit

Part Number: WS-01-0100-1326

These heated insoles from Hotronic are anatomically shaped to support the arch of the foot, so you can enjoy the ultimate comfort when warming your feet with these battery powered ski boot heaters. These Semi Custom Heat Ready Insoles can fit US women's shoe sizes 6 to 7.5. Just trim the insoles down to fit the smaller size, attach the heating elements and battery packs and off you go on a long adventure in the coldest weather with comfy feet all day long. These custom boot heater insoles are compatible with all Hotronic battery packs and heating elements. To install, first make sure the heating element is situated directly under the ball of your foot. Then cut a narrow slit for the heating element cord to run through and stick the heating element on the bottom of the custom insole. Attach the heating element to the battery pack and you're all set. For detailed instructions on how to set up your Hotronics, check out our guide.

• Heated insoles fit in any shoe
• Size Small: 23.0-24.5 (US Women's 6-7.5, Men's 5-6.5)
• Trim to a custom fit
• Compatible with Hotronic battery packs and heat elements

Part Number: 01-0100-1324

Use the 80cm Therm-ic Extension Cords to keep your boot heater battery pack on your waist. Clip your PowerPack to your belt, plug in the extension cords and then run them each down the inside of your pant legs. Then they can easily plug into your heated insole's heat element and you are all set for easy access to temperature controlled ski boots.

• 1 pair Therm-ic Extension Cords
• 80cm (31.5 inches)
• Allows you to wear ski boot heater batteries near your waist
• Gives you easier access to your temperature controls
• Compatible with all Therm-ic PowerPacks

List Price: $25.00 Part Number: TC-01-2100-005

The Hotronic Battery Pack Wire Clip Kit is replacement part for when you need to upgrade the wire clip system on your ski boot heaters. If a wire clip goes missing, gets bent or broke, you can easily replace it with a clip from this kit. Use these clips on any Hotronic battery pack to secure it to your power strap.

• Replacement wire clips
• 1 pair

Part Number: 01-0100-1590

When you have big feet or tall boots, use the 20cm Hotronic Extension Cords to connect your battery packs to your Hotronic Heating Elements. This extra length lets you attach your battery pack at the front of your ski boot, to keep it out of the way of the chairlift and other potential hazards. Hotronic extension cords are great for those who want to rig up their heating system in an innovative or ingenious way.

• 1 pair extension cords for ski boot heaters
• 20cm (about 9 inches)
• Connect battery packs to heating elements
• Great for tall boots

Part Number: 01-0100-1517

Hotronic Attachment Straps are used to secure your Hotronic battery pack to your leg or on the top of your chosen footwear for hours of warmth and comfort. These Velcro™ straps can be used as power straps on your ski boots for better performance. Use them with Hotronic Strap Brackets for the most secure attachment rig. These straps are the ideal ski boot heater accessories when your shoes or boots lack a secure spot to hold your battery pack.

• 1 pair attachment straps
• Attaches your battery packs to your ski boots or shoes
• 19 inches long, 1 inch wide (42.26 x 2.54cm)
• Black

Part Number: 01-0100-1510