SNOWBOARD ACCESSORIES

Looking for a traction pad that looks rad on any board? The Punker Studs by One Ball Jay will provide all the grip you need when getting of the lift, doing one footed tricks and more. Slip less, shred more.

• High quality stomp pad form a trusted brand
• 9 pack
• .5", 1.27cm

Part Number: ASP

Can you smell that? Mmmmm Bacon! That's right you can have this delightful piece of bacon at your feet all day on the mountain with OneBall Jay's Bacon Snowboard Traction Pad. This stomp pad is great for keeping your feet on your board before strapping in. This 3"x7" design is also wide enough to clean off any snow that has stuck to your boots so that when you strap in you can make sure you are that much closer to your board to improve control.

• Stomp pad for snowboards
• Bacon Design
• 3"x7"
• Clear, grippy rubber
• Installation instructions on the package

Part Number:ASBA

With OneBall Jay's Beardo snowboard traction pad you will have everybody on the mountain admiring your well kept thick beard. This stomp pad is great for keeping your feet on your board so you can get off the lift with confidence and class before strapping in. This 7"x6" design is also wide enough to clean off any snow that has stuck to your boots so that when you strap in you can make sure you are that much closer to your board to improve control.

• Stomp pad for snowboards
• Baeardo Design
• 7"x6"
• Clear, grippy rubber
• Installation instructions on the package

Part Number:ASBE

With the OneBall Jay Fast Times traction pad you can be just like Jeff Spicoli catching those "Tasty Waves" in the cool mountain air. There is no feeling quite like surfing that fresh powder. Rather than feeling like you are battling some humongous waves while getting off the chair lift, you can get off cool and collective with your Fast Times Traction Pad.

• Stomp pad for snowboards
• Fast Times Design
• 9"x3.5"
• Clear, grippy rubber
• Installation instructions on the package

Part Number:ASFT

Slap this wide eyed friend on your board to ensure that you always have great traction and clean boots before strapping in. When applying you want to make sure that the surface of your board is clean and that you know exactly where you want to place it as you should only stick it to a board once. It is also recommended to let it adhere to the board for 12 hours before riding. If you are wise like an owl and follow these few tips, you are going to be sure to love this traction pad.

• Stomp pad for snowboards
• Owl Design
• 5"x4"
• Clear, grippy rubber
• Installation instructions on the package

Part Number:ASO

Want to go snowboarding, but don't want to leave your dog at home? If you've got this problem, then you aren't alone. Thankfully OneBall Jay has came up with the perfect solution. With the OneBall Jay Lab stomp pad you will always have an adorable friend cheering you on. Although it may not be as enjoyable as bringing your pooch up on the slopes with you, it is a close second. Outside of being extremely cute addition to your board, he also is great at removing built up snow on the bottom of your boots before you strap in.

• Stomp pad for snowboards
• Lab Design
• 5"x5"
• Clear, grippy rubber
• Installation instructions on the package

Part Number:ASL

Didn't have time for coffee this morning? That's okay because with the Walter 6” Snowboard Traction Pad you'll have it on your board every day. Featuring Walter himself from The Big Lebowski. It is grippy and keeps your feet on your board. To install all you have to do is make sure your board is clean, peel the backing off and stick it to your board.

• Traction pad to keep your feet on your snowboard
• 6” diameter
• Picture of Walter with a coffee can
• Only stick once to board
• Let adhere to board for 12 hours before riding

Part Number: ASWA

"Do it while your soul's still burning" said the great Neil Diamond. And with this stylie Neil's Diamonds traction pad from One Ball Jay, you'll have the stability to do so. Make sure your board is completely clean before sticking this stomp pad on, and only stick it once. We recommend tracing the area you want to adhere the stomp pad to before actually going for it. You can use a hair dryer to help stick the pad securely to the board if you choose.

• Stomp pad for snowboards
• Helps foot get traction
• Shiney diamonds make a diamond shape under foot
• Great for adding traction
• Looks great on any board
• Silver metallic color

Part Number: ASND UPC: 022099745129

Printed with "The Dude" from the epic cult classic "The Big Lebowski", this grippy traction pad for snowboards keeps your feet on your board while supporting the laid-back vibe of The Dude we all aspire to.

• Traction pad to keep your feet on your snowboard
• 5 x 4 inches (10 x 12.4 cm)
• Picture of The Dude with bowling pins
• Only stick once to board
• Let adhere to board for 12 hours before riding

Part Number: ASD UPC: 0765857243184

Perfect for snowboards, this 4mm plexi scraper from Toko is 9 inches long. The sharp edge on the acrylic ensure this scraper will remove wax easily from your bases without damaging them.

• Snowboard wax scraper
• 4 sharp corners
• Clear, with black Toko logo
• 4mm thick
• 9 x 2.5 inches (23 x 6 cm)

Part Number: 5540885 UPC: 080500008850

This hand held edge sharpener for snowboards provides a 90 degree and 88 degree angle with minimal effort. Give your snowboard a touch up tune before you hit the slopes with the Wonton Edge Tool from One Ball Jay. With an ergonomic grip that easily fits your fingers, you can smoothly sharpen your edges for a day of fun riding.

• Handheld edge sharpening tool for snowboards
• 88 degree and 90 degree
• File included
• Ergonomic grip

Part Number: OBJ-TTW

This 13 inch Round True Bar from Kuu is ideal for testing the flatness of snowboards. Every good snowboard tuner needs one of these to ensure their finished product is going to offer the highest performance and most fun on the slopes.

• Flatness tester for snowboards
• Round
• 13 inches (33cm)

Part Number: K535WS

This thick, snowboard sized wax scraper from Kuu is a burly plexi scraper that gets the job done right. At 5mm thick, this wax scraper removes wax cleanly and smoothly, and features a notched corner for removing wax from the edges of the skis or snowboard you're tuning.

• Snowboard wax scraper
• Black
• 5mm thick
• Notched corner
• 13 x 2.25 inches (31cm x 5.7cm)
• 0-31 cm ruler on one side

Part Number: K300S

The FK SKS Snowboard Wax Scraper is a super burly plexi scraper for removing excess wax from your snowboard. This large and in charge wax scraper for snowboards is great for a ski shop or to use at home at your personal tuning bench. The wide length is perfect for snowboards and the whopping 6mm thickness can stand up to the toughest scraping jobs. You will absolutely love the strength and durability of this beefy scraper.

• 6mm thick wax scraper
• Removes excess wax from snowboards
• Finely ground and polished

Part Number: 4002 UPC: 4250493732575

The One Ball Jay Seeker Wax Scraper is a forgiving wax scraper for new snowboard and ski tuners. When your ski wax has cooled, you can easily remove any excess with the sharp edge of this hot green wax scraper. The rounded corners leave little room for error, unlike sharp corners. This scraper also has a notched corner to clean up you edges when wax builds up around them.

• Hot green acrylic scraper for snowboards and skis
• Rounded corners
• 1 notched corner
• 8 x 2.5inches (20.32 x 5.08 cm)

Part Number: TSSK

The One Ball Jay 12 inch Wax Scraper is a hot green plexi scraper with super sharp edges for removing excess wax from your bases. This wide scraper is ideal for snowboards.

• Tough wax scraper
• Removes extra cooled wax from your ski and snowboard base
• Hot Green
• 12 x 2.5 inches (30.48 x 5.08cm)

Part Number: TS12 UPC: 22099745815

Our One Ball Jay Pit Stop Tuning Kit is an awesome portable tuning kit for skis and snowboards. This set up is perfect for on hill touch ups or tailgate tunes if you happen to take a break. The Pit Stop kit has everything you need for edge and wax touch ups. These make great gifts for snowboarders and are affordable supplements to your own ski tuning equipment.

• Touch up tuning kit for skis and snowboards
• Includes instruction manual
• F-1 Universal Wax for skis and snowboards
• Wax scraper (plastic)
• Edge sharpener
• Mini screwdriver
• Tough storage pouch

Part Number: TKPS

The One Ball Jay Basic Tuning Kit keeps all your ski and snowboard waxing and tuning gear stuffed into a convenient pouch. All you need is a flat surface and a wax iron and you are all set to go! This kit has everything from p-tex base repair sticks (no p-tex gun needed for these), edge tuners and high performance wax. This is a great little travel tuning kit for vacations and competitions.

• Wax and tuning kit for snowboards and skis
• Include high quality F-1 Shred Snowboard and Ski wax
• Ceramic tuning stone
• 3 clear p-tex drip candles for base repairs
• Edge tuning tool for 90 and 88 degree edge bevel
• Plastic wax scraper
• Wire file cleaning brush
• Custom zippered pouch

Part Number: TKB UPC: 22099745693

The One Ball Jay World Domination Tuning Kit has everything you need to tune your own snowboard or skis at home. Forget about shelling out fifty bucks and waiting for days to get your gear tuned up. With the complete instruction manual and set up in the World Domination Tuning Kit, you can get 'er done in an hour or two, so you can be strapped in and ready to catch first chair with expertly tuned gear the next time that epic storm rolls in. This kit includes a wax iron, edge tool, file brush, wax scraper and steel base scraper, cable lock, ceramic edge stone, base pads, p-tex drip candles, a screwdriver and stomp pads as well as two different types of wax and a leash. All of this is fitted into a cool custom bag so you can keep your ski and snowboard tuning tools organized.

• Complete tuning kit for snowboards (can also be used on skis)
• Includes a snowboard wax iron (North American model 110V with a standard plug
• Instruction manual
• Pocket edge sharpener
• File brush
• Plastic wax scraper
• Steel scraper for base repairs
• Cable lock
• Ceramic edge tuning stone
• Fiber-tex base pads for polishing
• P-tex drip candles for base repairs
• Tiny screwdriver you can take anywhere
• Chinese Stars Stomp Pads
• 2 kinds of ski/snowboard wax
• Snap Pee Snowboard Leash
• Custom Bag
• Makes a great gift

P{art Number: TKW UPC: 22099745754

Don't forget to buy an axle for all of those snowboard roto brushes. The Toko Axle for Snowboard Rotary Brushes is just the piece you need to complete your fast paced snowboard waxing set up. With rotary brushes, you can quickly brush and polish the waxes on any snowboard in a snap, much quicker than doing it by hand. Just attach any snowboard size rotary brush (300mm width) to the Toko Snowboard Axle and fasten it to any normal hand drill. Make sure your drill is set to a low rpm and then lightly brush the base of the snowboard. Different brushes require a different number of passes but make sure you finish with two smooth tip to tail strokes. As a safety precaution, it is recommended that you wear protective eye covers.

• Single axle with a handle for snowboard roto brushes
• Fits 300mm (11.8in) wide brushes
• Attaches to any standard drill
• Speeds up base brushing and wax polishing
• Set drill to 800 rpm for best results

List Price: $83.70/ Part Number: 5542584

The Toko Grey Nylon Rotary Brush for snowboards is an extra wide version of the nylon rotary brush designed specifically for snowboards. These medium stiff bristles will brush wax out of your base structure quickly and efficiently. This is very useful for riders with lots of snowboards to wax. Just slide this base brush onto the Toko axle for snowboard rotary brushes and attach it to a standard drill. With light pressure and a low rpm, you will get the job done in no time at all. Some wax technicians use this brush as an all purpose brush, while others prefer to use it after the brass rotary brush.

• Nylon rotary brush for quickly brushing wax off of snowboards
• Brush width 300mm (11.8in)
• 4mm bristle length
• Medium stiff bristles are 0.12mm diameter
• Designed to work with Toko axles for snowboard rotary brushes and a standard drill
• Set drill maximum to 800 rpm to protect your snowboard base

List Price: $83.70 Part Number: 5542549

The Wintersteiger Board Stopper is a vise ideal for tuning wide skis and snowboards. Made from strong, high-impact plastic body, this vise is great for professional and at-home ski and snowboard tuning. The Board Stopper comes with a unique grip that is specially designed for holding snowboards perfectly for tuning and waxing. The grooved center of this snowboard vise gives you the tightest hold for side filing. Make sure you can get the best performance out of your snowboard or powder skis when you tune it properly, using a board stopper that fits like a glove.

• Holds wide skis and any size snowboard
• Special rubber provide better hold
• Bindings clearance 160mm (6.3in)
• 2 side positions: 90 degrees and 60 degreeds for easy access snowboard edge tuning

Part Number: 57-401-025 UPC: 900942100598

This plexi scraper from Wintersteiger is larger than most, to accommodate snowboards and the popular fat skis of today. The Wintersteiger Snowboard Plexi Scraper is 5mm thick, offering a stiff flex so you can easily remove excess wax from the base of snowboard or skis. This plexi scraper has a convenient hole for hanging, so you can keep your ski and snowboard tuning tools organized.

• 320 x 70 x 5 mm (12.6 x 2.76 x 0.2in)
• Removes excess wax from skis and snowboards
• Hole for hanging
• Rounded corners
• 90 Degree Edge on all sides

Part Number: 55-200-015 UPC: 9120028580139